24V power adapter for 24V passive POE PDs, for MikroTik and 24V UBNT, Openmesh.
48V power adapter for most IP camera, 802.3af/at WiFi AP. 12V 1A for 12V IP camera.
This Passive PoE injector, whis a simple, cost-saving and convenient equipment for IP camera, IP phone, WiFi Access point, powered onver Ethernet cable.
The PoE injector can power PDs 100 meters far away from power source with safety, low-cost and easy installation.
This PoE injector is passive PoE but compatible with all IEEE802.3af/at powered devices,
As you know, POE switch is expensive, while POE injector+normal switch= POE switch, which share the same function, but POE injector+mormal switch are much more economical.
(For most IP cameras, about 6 watts per camera, 8 watts if they have PTZ or IR features. If "12, POE" cameras, it still need 48V Powered Over Ethernet.)
DC plug input, 6 Lan port (Data in), 6 POE port (Data+power), shielded
For IP camera, IP phone, WiFi, Access point, etc.
Over current, over voltage protection.
FCC CE RoHS certified.
POWER OFF --Off 0 to 400mA --Green >400mA -- Red
12-56V DC 2.1MM
12-56V PER PORT (31 watt max each port)
Pins 12&36, or 12/36&45/78
Mode A: 1/2V+, 3/6V- Mode B: 4/5 V+ & 7/8 V-
TIA/EIA 568 Cat. 5/5e/6/6e
-40°C ~ 70°C
CE , FCC, RoHS
· 6 port POE Power Injector Panel
· 6 LAN ports, 6 LAN+Power(POE) ports, shielded
· 31 watt max each port, resettable fuse on each port
· Power VOIP phones, IP Cameras, WiFi Access Points, and more PDs
· Same voltage to all ports
· 2.1mm x 5.5mm for DC plug
· LED power light
· Works with any ethernet switch or router, add POE to any switch or router
· Use any power supply to 48 volts, 24 volt, 18 volt, 12 volt, according to your need
· Plastic outside box
We are manufacturer of POE produducts and Waterproof RJ45 Connectors.
Welcome to contact me!
QQ : 1226315077