24V Passive DC PoE Panel Injector 48V Mutiport PoE Switch
16 Ports 100Mbps
100000 Piece/Pieces per Month
Packaging & Delivery
36pcs and 23kgs each carton
Carton size : 52*45*17
5-15 dys after payment
16 Port PoE Injector 100Mbps 1U "19" Rack Mount PoE Patch Panel
16 port PoE injector
Model No : ZQPOEI016
PoE method : passive PoE Mode B
Usage : work with 24v power supply for Passive PoE
work with 48v power supply for 802.3af/at PoE
Rate : 10/100M version
Input : 2.1*5.5mm female DC socket and 3 pins of screw socket
Power supply is separated
Packing : 36pcs and 23kgs each carton
The 16 port PoE panel is used 10/100M Ethernet, The upper Rj45 sockets is form “LAN/Switch/PC ” 1/2&3/6 are transmitting data .
The under RJ45(power+data) socket is to deliver data and power:1/2&3/6 transmitting data, 4/5(+)&7/8(-)for power.
Passive POE iscomposed of 12 set of Rj45 sockets and two 60V DC power jack.
Input power requests160W or more AC TO DC power converter.The input dc hole diameter is 2.5mm and the other end OD id 5.5mm. And the other . Each socket provides protection against short overflow (current protection 650mA+15%-15%).
The sum total output power must be lower than the MAXinput power of AC-DCpower converter.
If not, it is necessary to consider taking higher AC-DC power converter. Therecommended formula for AC-DC power converter is 10W per RJ45 set (1 set = 2 x RJ45sockets).
For example, 16 x10W = 160W for 16 port Passive PoE panel . The configuration size of panel is 1U (height), 19” (width) and 25mm (thickness), as isavailable to answer market demand and convenient to be installed directly.
Picture Details :
WHY CHOOSE POE:
As Ethernet becomes more commom in serve rooms and network backbones of most organization, POE becomes a much more attractive solution to deploy network device without changing your existing infrastructure.
Using one cable for both data and power to devices significantly reduce the power line installation cost for electronical wiring, conduits and outlets throughout the buildings.it also reduces future maintenance costs, bringing cost elimination when using POE technology for large installations.
POE is standards based, so interoperability across vendors is guaranteed. This means that POE can be used to provide maximum flexibility for device installation when it is difficult to provide a power source at hard to reach locations. Also, even greater flexibility can be provide with the use of POE splitters, POE technology can also be applied to devices weren't designed for POE.
Using just one cable instead of separate cables for data and power improves overall network reliability and deployment flexibility safety. POE is a safe power solution. To avoid damaging devices or accidental contact, there are numerous safety procedures in the POE specification which includes Over-Current, Under- Current and fault protection.
Shenzhen ZhangQing Electronic LTD was founded in 2010. After these years developing, now weand have 5 salesman, 8 R & D engineers and 120 manufacture colleague, finished many unique and completed PoE midspan product line, 200w full range of power supplies,rich special features of PoE switch etc products.For the moment we have our sales office in Shenzhen and manufacturing factory in ZhongShan. Since the company set up, we focus on power supply and Power Over Ethernet(PoE) all the time. so "focus, professional, honest, innovation,wise " are our company faith. Devoting ourself provide PoE and power solution on WiFi Access Point, IP camera, IP phone etc for our customers is our target.Creating value for customers by our products and services is our pursue.
Choose us, you will get value , professional, comfortable product and service. Let's work together to gain a bright future for all of us.